NEC Express5800/120Rh-2 N8100-1126F - Manual (Page 59)

General Description 2-27
NEC EXPRESSBUILDER
The CD-ROM that comes with the server contains a setup utility called "NEC
EXPRESSBUILDER."
The major functions of the NEC EXPRESSBUILDER are:
„ To install the Operating System.
"Express Setup" helps you to install the Windows Operating System. (See Chapter 5)
„ To diagnose the system.
NEC EXPRESSBUILDER includes the System Diagnostics to check your server. (See
Chapter 6)
„ To create a support disk.
Use this function to create the support disks used to boot the utilities from the floppy disk,
or the OEM floppy disk used for a manual installation of Windows. (See Chapter 6)
„ To update the BIOS.
Use this function to update the system BIOS or firmware of the server. (See Chapter 6)
„
To update the Windows System*
"Update Express5800 system" in Master Control Menu(Windows-based NEC
EXPRESSBUILDER feature) updates the several resources of Microsoft Windows Server
2003, Microsoft Windows 2000. (See Chapter 6)
„ To install the utilities.
NEC EXPRESSBUILDER includes some management software for Windows (NEC
ESMPRO, NEC DianaScope and so on) and maintenance utilities for DOS (System
diagnostics, Off-line Maintenance Utility and so on).
You can install the applications for Windows from Master Control Menu and install the
utilities for DOS from Tools menu. (See Chapter 6)
„ To read the online documents*
You can refer to the online documents from Master Control Menu. (See Chapter 6)
* These functions are available under the Windows system.
NOTE: Some features among those listed above can be used from the
remote computer via cross cable (COM), or LAN. See Chapter 6 for
details.