NEC Express5800/120Rh-2 N8100-1126F - Manual (Page 184)

5-42 Installing the Operating System with Express Setup
Installing and Setting Device Drivers
Follow these steps to install and configure the device drivers.
PROSet
PROSet is a utility that confirms the function of network contained in network driver. Be sure to
install. Utilizing PROSet enables the following issues:
„ Confirm detailed information of the adapter.
„ Diagnose loop back test, packet transmission test and so on.
„
Specify teaming.
Configuring several network adapters as one team provides the server an environment tolerant on
any trouble and enhance throughput between the switches.
PROSet is necessary to utilize these features.
Follow the procedure below to install PROSet.
1. Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2. Click Start menu, point to [Program], [Accessory] and click [Explorer].
3. Run "PROSET.EXE" in the following directory.
<CD-ROM Drive Letter>:\WINNT\W2K\BC5\PROSET\WIN2K
The [Intel(R) PROSet - InstallShield Wizard] dialog starts.
4. Click [Next].
5. Choose "I accept the terms in the license agreement" and click [Next].
6. Choose "Typical" and click [Next].
7. Click [Install].
8. When [InstallShield Wizard Completed] window is displayed, click [Finish].
9. Restart the system.