NEC Express5800/120Rh-2 N8100-1126F - Manual (Page 388)

F-2 Installing Windows 2000
Disk Array Controller (N8103-91)
Disk Array Controller (N8103-91) does not support Windows 2000.
Installing Service Pack
You can install the Service Pack on the server. When the Service Pack is not attached to your
system, prepare it by yourself.
Updating System
If you modified the Windows system, execute "Update Express5800 system" in Master Control
Menu.
Re-installing to the Hard Disk Drive which has been upgraded to
Dynamic Disk
If you want to leave the existing partition when installing the system on the hard disk drive
upgraded to Dynamic Disk, note the following issue:
„
Do not select the partition that OS had been installed as the partition to install the OS
newly.
„ Select "Use the current File System" for the format of OS partition.
Manual Installation when N8103-80F/81F/86 and SCSI HostRAID Keeps
Connection
If you keep those controllers connecting during installation process, pop-up messages may appear.
This does not affect on system behavior. Click [YES] and continue the installation. Follow the
message hereafter.
MO Device
If you specify the file system as NTFS with MO Device connected during the installation, the file
system will not be converted normally. Disconnect MO Device and restart the installation from
the beginning.