Problems with windows server 2003 r2 – NEC Express5800/120Rh-2 N8100-1126F User Manual
Page 254
8-18 Troubleshooting
Problems with Windows Server 2003 R2
There are some cases that an event log is registered as follows when you operate Windows
Server 2003 R2.
Source:
IPMIDRV
Type:
Error
Event ID:
1001
Description: The IPMI device driver attempted to determine if the system supported an IPMI BMC
device. The driver attempted to detect the presence of the IPMI BMC by searching the
SMBIOS for Type 38 record. But either no record was found or the record was not
compatible with the version of the device driver.
If a SMBIOS Type 38 record was detected, the Dump Data field of the event contains
a binary representation of the record.
→ If you use "Hardware Management" which is provided by Windows Server 2003
R2, above-shown event log will be registered.
For more details, refer to "Enabling the Hardware Management Feature bundled in
Windows Server 2003 R2" on the following site.
[NEC Express5800 Web Site]
http://www.nec.co.jp/express/download/W2K3_R2