NEC Express5800/120Rh-2 N8100-1126F - Manual (Page 337)

Appendix A
Specifications
NEC Express5800/120Rh-2
Item N8100-
1061F
N8100-
1062F
N8100-
1063F
N8100-
1100F
N8100-
1125F
N8100-
1126F
Type Intel  Xeon  processor
Clock/Cache 3.20DGHz
/1MB 3.40DGHz
/1MB 3.60GHz
/2MB 3.20GHz
/2MB 3.40GHz
/2MB 3.80GHz
/2MB
Standard 1
CPU
Maximum 2
Chipset E7520 (800MHz)
Minimum 1GB (512MB×2)
Maximum 16GB (The standard DIMM must be replaced.)
Expansion unit 2 DIMMs (512MB/1GB/2GB/4GB)
Expansion times 3 times
Memory module SDRAM DIMM (Low Profile DDR2-400 Buffered Type)
Memory
Error check ECC
Graphics (VRAM) ATI RADEON 7000 (VRAM 16MB)
Floppy disk (standard) 3.5-inch drive × 1
Hard disk (standard) None
Hard disk (maximum) 1.8TB (300GB × 6)
Auxiliary
input
device
CD-ROM (standard) ATAPI interface × 1 (Load on tray type, x24 speed)
Hard disk drive bay 6 slots Additional
bay 3.5-inch bay 1 slot
PCI (64-bit/100MHz) 3 slots Additional
slot Low Profile PCI
(64-bit/66MHz)
3 slots
LAN interface 1000Base-T/100Base-TX/10Base-T (2 ports)
Keyboard/mouse MINI DIN 6-pin connector (1 port)
USB 4-pin (4 ports, 2 at front panel, 2 at rear panel)
Serial 2 ports, (D-sub 9-pin)
Network RJ-45 (2 ports)
Display MINI D-sub 15-pin (1 port)
External
interface
SCSI Ultra 320 SCSI (1 port)
Cabinet design Rack-mount type (2U)
External dimensions 427 (width) × 88 (height) × 722 (depth) mm
Weight (Max.) 21 kg (30 kg)
Power supply 100 to 120 VAC ±10%, 200 to 240 VAC ±10%, 50/60 Hz ±1 Hz
Power consumption (maximum) 610 VA, 600 W
Temperature 10 to 35°C (operating), -10 to 55°C (non-operating, storage) Environmental
requirements Humidity 20 to 80% RH (no condensation)
Others NEC EXPRESSBUILDER supported, NEC ESMPRO provided
in the standard configuration