NEC Express5800/120Rh-2 N8100-1126F - Manual (Page 363)

Appendix E
Installing Windows Server 2003
This section explains how to install the Windows Server 2003 without using Express Setup.
BEFORE INSTALLING WINDOWS SERVER 2003
Please read carefully the following information BEFORE commencing your Windows Server 2003
Installation.
Optional Board Supported by NEC EXPRESSBUILDER
NEC EXPRESSBUILDER CD-ROM attached to your system supports the following optional
boards:
NOTE: If you want to install the other boards by using a driver floppy
disk ("OEM-FD for Mass storage device"), except ones listed below,
see "Exceptional setup" and "Installing Optional Mass Storage Driver"
of "Configuration Diskette Creator" in Chapter 6.
„ Supporting installation of OS in NEC EXPRESSBUILDER
– N8103-80F Disk Array Controller (SCSI 1ch)
– N8103-81F Disk Array Controller (SCSI 2ch)
– N8103-86 Disk Array Controller (0ch)
– N8103-91 Disk array controller (Internal SAS HDD)
– Adaptec HostRAID(SCSI) (Controller on the I/O board)
„ Other optional boards
– N8103-56 SCSI Controller
– N8103-65F SCSI Controller
– N8103-75 SCSI Controller
– N8103-95 SCSI Controller
– N8190-126 SCSI Controller
[In case of use of N8103-91]
In use of N8103-91, please surely install Windows Server 2003 ServicePack 1 by
Windows Server 2003.