NEC Express5800/120Rh-2 N8100-1126F - Manual (Page 400)

F-14 Installing Windows 2000
Installing SCSI Controller Driver (N8103-65F/75)
If you utilize SCSI controller driver (N8103-65F/75), install it according to the following procedure:
1. Start [Device Manager] from [Start] menu → [Control Panel]→ [Administrative Tools] →
[Computer Management].
2. Double click the SCSI Controller driver which Device Manager lists as unknown device.
3. Click [Update Driver].
4. When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5. Select "Don't search. I will choose the driver to install" and click [Next].
6. Click [Have Disk..].
7. Insert "Windows 2000 OEM-DISK for NEC EXPRESSBUILDER" into the floppy disk
drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].
8. Specify the following driver and click [Next].
– [INITIO INI-A10XU2W PCI SCSI Controller] (When N8103-65F board is installed.)
– [Adaptec SCSI Card 29320ALP - Ultra320 SCSI] (When N8103-75 board is installed.)
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.
Installing SCSI Controller Driver (N8103-56/-95/N8190-126)
If you utilize SCSI controller driver (N8103-56/-95/N8190-126), update your system with NEC
EXPRESSBUILDER CD-ROM attached to your system.
The SCSI controller driver will be installed automatically.