National Instruments 5411 - Manual (Page 11)

Chapter 1 Introduction
DAQArb 5411 User Manual 1-2 © National Instruments Corporation
RTSI bus triggers on devices that use the RTSI bus or the digital trigger
on the I/O connector.
Detailed specifications of the DAQArb 5411 devices are in
Appendix A, Specifications.
What You Need to Get Started
To set up and use your DAQArb 5411, you will need the following:
❑
One of the following DAQArb 5411 devices:
– PCI-5411
– AT-5411
❑
DAQArb 5411 User Manual
❑
NI-DAQ for PC compatibles, version 5.0 or later
❑
One of the following software packages and documentation:
– VirtualBench-Arb
– VirtualBench-Function Generator
– LabVIEW
– LabWindows
®
/CVI
– Any standard C compiler
❑
Cables and accessories
– SMB to BNC, 50
Ω
cable
– SHC50-68 50-pin to 68-pin cable for pattern generator outputs
(optional)
– SCB-68 terminal block accessory in generic configuration
(optional)
❑
16 MB memory module (optional)
❑
Your computer