National Instruments 5411 - Manual (Page 14)

Chapter 1 Introduction
© National Instruments Corporation 1-5 DAQArb 5411 User Manual
Optional Equipment
National Instruments offers a variety of products to use with your
DAQArb 5411, including probes, cables, and other accessories, as
follows:
• Shielded and unshielded I/O connector blocks (SCB-68, TBX-68,
CB-68)
• RTSI bus cables
For more specific information about these products, refer to your
National Instruments catalogue or web site, or call the office
nearest you.
Cabling
The following list gives recommended part numbers for cables that you
can use with your 5411 device:
• BNC male to BNC male, 50
Ω
cable from ITT Pomona Electronics
(part number BNC-C-xx)
• BNC male to BNC male, 75
Ω
cable from ITT Pomona Electronics
(part number 2249-E-xx)
• BNC female to RCA phono plug adapter, from ITT Pomona
Electronics (part number 5319)
• BNC 50
Ω
feed-through terminator adapter from ITT Pomona
Electronics (part number 4119-50)
• BNC female-female adapter from ITT Pomona Electronics
(part number 3283)