National Instruments 5411 - Manual (Page 50)

Chapter 4 Arb Operation
© National Instruments Corporation 4-25 DAQArb 5411 User Manual
Figure 4-22. Analog Filter Correction
Note: You can change the filter frequency correction at any time during
waveform generation.
Digital Pattern Generation
The DAQArb 5411 provides 16-bit digital pattern generation outputs at
the digital connector. This digital data is first synchronized to the
sample clock and then buffered and sent to the connector through a
80
Ω
series resistor. The sample clock is also buffered and sent to the
digital connector to latch the data externally. Figure 4-23 shows the data
path for digital pattern generation. The digital pattern data is available
directly from the memory; it does not go through the digital filter.
A
B
C
Frequency (MHz)
Gain (dB)
A. Typical Analog Filter Characteristics
B. Corrected Filter Characteristics
C. Correction Applied