NetComm 5330 - Manual (Page 20)

5330/5340 IP Phones – User Guide
Specify Audio Feedback Options
The error beep volume in the phone is related to the volume of the speaker. You can set the beep
volume using this procedure; however, adjusting the speaker volume also affects the beep
volume.
To adjust the volume of the audio feedback:
1. Press Settings or .
2. Press Audio Feedback.
3. Set the options using the appropriate actions described below:
Option Action
Turn audio feedback off for
errors Press Turn Off.
Adjust audio for error
beeps Press Volume + or Volume –
Turn audio feedback on for
errors Press Play Error Tone
4. Click Save.
Note: Press Cancel at any time to exit this application without making any changes.
Specify Text Size
To specify the text size that displays on the phone:
1. Press Settings or .
2. Press Text Size.
3. Select Large Text or Small Text.
4. Press Save.
Note: This setting is available only on the 5340 since the 5330 always uses large text. Large is
the default text size on the 5340 IP Phone.
20