NetComm 5330 - Manual (Page 26)

5330/5340 IP Phones – User Guide
26
5. Proceed to Installing the Integrated Office Companion Application below.
Installing the Integrated Office Companion Application
Use this procedure to install the Integrated Companion Application software.
1. Determine the installation directory from which to install the Integrated Office
Companion Application. For example, this may be a CD-ROM or a network directory.
Contact your System Administrator if you have any questions.
2. Shut down all other applications before installing the Integrated Office Companion
Application.
3. From the installation directory, double-click Setup.exe.
4. If there is a previous installation of the Integrated Office Companion Application or PC
Companion Application on your PC, the installer indicates that you should remove it
first. Use the Add or Remove Programs in the Control Panel, and scroll to Mitel 5330
5340 PC Companion Application, select it, and click on Remove. When this is
completed, double click Setup.exe again if you exited the installation. Otherwise click
OK and the installation will continue.
5. Follow the instructions in the installation program.
6. To launch the Integrated Office Companion Application, click the Windows Start menu
and navigate to Mitel -> Integrated Office Companion.
7. In the Integrated Office Companion application, do the following:
a) Select Integrated Office Connectivity from the menu on the left.
b) Enter the IP Address field you recorded in Step 2 in Configuring the Integrated Office
Companion on Your Phone.
c) Enter the password you selected in Step 4 in Configuring the Integrated Office
Companion on Your Phone or use the default password.
8. Click Connect.
The Integrated Office Companion Application connects with the 5330/5340 IP phone.
Notes:
• The Integrated Office Companion application is started every time you log in or your PC
is restarted assuming you elected this option during setup.
• If your Integrated Office Companion Application is not connecting to your phone (for
example, if your programmed feature Keys are disabled or you receive an error message
upon start-up), contact your administrator.