NetComm 5330 - Manual (Page 77)

5330/5340 IP Phones – User Guide
Speak@Ease
Users of the Speak@Ease softkey can place a call by speaking the name of the person they wish
to dial. Speak@Ease enables you to have access to Mitel Speech Server. The Speech Server is a
speech recognition application that routes incoming calls to a specific destination based on
spoken commands.
To dial a call using Speak@Ease:
1. Press the key you have programmed to Speak@Ease.
2. Speak the name of the person you wish to call.
Speed Call
Speed Call is an application that allows you to dial a specific number with one key press. You
must program Speed Call on a Programmable key. For more information on programming this
key, see
Program Feature Keys Using the Settings Application .
To make a Speed Call:
• Press the key that you have programmed as your Speed Call key.
Tag Call
Tag Call allows you to signal that you are the victim of a threatening or malicious call. Using the
tag, your system administrator or Telephone Company can identify the source of the call and
provide this information to appropriate personnel or authorities.
CAUTION: Tagging a non-malicious call may result in fines or other penalties.
To tag a malicious call:
1. Press the programmed Tag Call key while the call is in progress. For information on how
to program keys, see to Programming Features On Your Keys
-OR-
1. Press (TRANS/CONF).
2. Dial the appropriate feature access code.
If the call was successfully tagged, Thank You is shown on the display; otherwise, Not
Allowed is displayed.
Note: Tag Call can be used on active two-party calls only. Calls on hold and conference calls
cannot be tagged.
77