NetComm 5330 - Manual (Page 64)

5330/5340 IP Phones – User Guide
To answer a call using Handsfree Answerback:
Phone state before Page arrives To answer the Direct Page
Phone is idle and MUTE
is flashing 1. Check that MUTE is OFF.
2. Listen for the paging party.
3. Begin speaking.
4. Lift the handset if you wish to switch from a Handsfree
call to a handset call.
You are on a handset or headset
call, and MUTE is OFF 1. Check that MUTE is flashing.
2. Press MUTE. The light turns ON solid, and you are now
speaking to the paging party and have muted your
handset/headset call.
3. Speak to the paging party. Press MUTE to alternate
between handset/headset and handsfree calls.
You are on a MUTED
handset/headset call, OR, you are
on a Handsfree call The party paging you receives a busy tone. Handsfree
Answerback does not interrupt your call.
To end a Handsfree Answerback call:
• Press either
(SPEAKER) or (CANCEL).
When the Handsfree Direct Page call ends, the MUTE key light returns to the state it was in
before the call was established.
64