NetComm 5330 - Manual (Page 46)

5330/5340 IP Phones – User Guide
To program Speed Call:
1. Press Settings or .
2. Press Programmable Keys.
3. Press the key you wish to program. If it’s already programmed, press Clear Key.
4. Press Speed Call.
5. Press Edit Label and enter the label for the Speed Call.
6. Press Save.
7. Press Edit Number and enter the phone number for the Speed Call:
- The maximum length is 26 characters.
- 0-9, # and *. Pause and Flash are not allowed.
- The hard dialpad cannot be used to enter the number.
8. Press Save, and then press Save again.
9. Press Close.
Notes:
• To return to the Feature or Applications list at any time, press Cancel or the
Applications key.
• You can also choose to Edit the Label, Clear Information, and Clear Key.
Clear Programming from a Key
You may wish to clear the programming from a key if you are no longer using it.
To clear the feature or application programming from a key:
1. Press Settings or .
2. Press Programmable Keys.
3. Press the key you wish to clear.
4. Press Clear Key.
Either press Cancel or reprogram the key.
46