NetComm 5330 - Manual (Page 62)

5330/5340 IP Phones – User Guide
Call Pickup
To answer a call that is ringing at another extension in your Pickup Group:
1. Lift the handset.
2. Press the key that you programmed as Pickup.
To answer a call that is ringing at another extension not in your Pickup Group:
1. Lift the handset.
2. Dial the appropriate feature access code.
3. Dial the number of the ringing station.
Campon
When you get a busy tone, you can use the Campon feature to be notified when the busy party
becomes available.
To Campon to a busy station:
• Press the I Will Wait softkey.
To retrieve a call when you hear the Campon tone:
• You can use the Trade Call or Call Swap feature with the
(TRANS/CONF)
hardkey or a programmable line key.
Direct Paging
Direct Paging allows you to page a party through the party’s handsfree speaker. If the paged
party has Off-Hook Voice Announce enabled, the page will be heard even when the party is on a
handset or headset call. If the paged party has Handsfree Answerback enabled and turned on on
the phone, your page automatically establishes a handsfree call with the paged party.
To page a party:
1. Lift the handset.
2. Press the Direct Paging feature key or dial the appropriate feature access code.
3. Dial the extension number.
4. Speak to the dialed party after the tone.
How you answer a Direct Page depends on whether Handsfree Answerback is enabled and
turned on at your phone. See one of the following procedures in this guide:
• Direct Paging - Handsfree Answerback Enabled
• Direct Paging - Handsfree Answerback Disabled
62