Telephone connection – NetComm SmartVoice Gateway User Manual
Page 16
16
SmartVoice Gateway(s) User Guide
YML832 Rev1
Telephone Connection
Example of SmartVoice Gateway using FXS interfaces
SmartVoice Gateway connecting directly to phone sets
After connecting telephone sets to Phone1-Phone4, users can make direct calls (Phone1-Phone4 are
FXS interfaces). Each set acts as an independent extension line.
Integrating the SmartVoice Gateway with PBX
Phone1-Phone4 are FXS interfaces, and some of them can be connected to telephone sets for direct
calls. Others can be connected to the PBX CO lines so that other extension lines can make VoIP calls.
Note:
The above diagrams show a 4-port SmartVoice gateway for illustration purposes.
An 8, 16 or 32 port SmartVoice gateway could also be used depending upon your
network requirements.