NetComm SmartVoice Gateway - Manual (Page 3)

SmartVoice Gateway(s) User Guide 3
YML832 Rev1
NTP (Network Time Protocol) .................................................................................................................70
System Operations (Save Settings) ........................................................................................................72
Software Upgrade .................................................................................................................................73
Logout .................................................................................................................................................74
4. Configuring the Gateway via IVR ............................................................................................................75
IVR (Interactive Voice Response) ............................................................................................................76
5. Dialing and dialed number routing principle ...........................................................................................82
Instruction ...........................................................................................................................................82
Dialed Number Processing Flow ............................................................................................................82
Appendix A: Glossary ...................................................................................................................................84
Appendix B: Cable Information .....................................................................................................................90
RJ-45 Network Ports ...........................................................................................................................90
Straight and crossover cable configuration ............................................................................................91
Straight-Through Cabling ......................................................................................................................91
Cross-Over Cabling ..............................................................................................................................91
Appendix C: Registration and Warranty Information ......................................................................................92
IMPORTANT NOTE
To ensure your Gateway complies with Australian Standards:
1) The symbol shall be marked next to the protective earthing terminal (not
GND) and the terminal shall be permanently connected via building wire.
2) The colour of the protective earth conductor insulation shall be green-and-yellow.
3) The protective earthing conductor shall be permanently connected first prior to
other connections (eg. telephone cables) and removed last after all other cables
have been disconnected.
4) The protective earthing shall not rely on telecommunications network or a cable
distribution system.