NetComm SmartVoice Gateway - Manual (Page 9)

SmartVoice Gateway(s) User Guide 9
YML832 Rev1
SmartVoice Gateway Hardware Description
Front Panel (all models)
• Power Indicator: Green light indicates a normal power supply.
• Run Indicator: Blinking green light indicates normal operation.
• Alarm Indicator: When the system starts up, the red light will blink. It also indicates abnormal
gateway behaviour.
• P1 – PX stands for Port 1 – Port X (or Line 1 – Line X)
• WAN stands for the WAN Port Indicator.
• L1 – LX stands for the LAN Port Indicator.
When starting up the system, the Alarm, Run, and Power indicators will light
up. After approximately 15 seconds, the Alarm indicator will go off, the Run
indicator will blink green, and the Power indicator will stay green under operational
conditions. If the Alarm indicator continues to blink, it means the system is
currently communicating with the ISP and has yet to obtain an IP address.
When the WAN is connected, the WAN indicator will light up green and if data is
being transmitted over the Internet, the indicator blinks green and orange.