NetComm SmartVoice Gateway - Manual (Page 82)

82 SmartVoice Gateway(s) User Guide
YML832 Rev1
5. Dialing and dialed number routing principle
Instruction
• After a phone number is entered, dial # to call out immediately or, wait until the “Inter DTMF
Timeout” expires (defined in “Advanced Options”, default=4 seconds).
• If the phone number fits the setting of Digit Map, the gateway dials out the phone number through
the assigned interface automatically.
• The phone number should have at least 2 digits (not including * and #).
Dialed Number Processing Flow
To maintain maximum flexibility, the number dialed will be looked up from several tables defined in the
gateway. Once no match can be found, it will look up again from the registered SIP Proxy Server. The
look up flow is shown below:
Speed Dial
Table
Extension
Number
Local Phone
Book
Phone Book
Manager
SIP
Proxy
A complete flow chart is on the next page.