NetComm SmartVoice Gateway User Manual
Page 48
48
SmartVoice Gateway(s) User Guide
YML832 Rev1
Dialing principle to enable PIN code
*Inbound Call Control PIN Code * Outbound Call Control PIN Code * Phone number
Using * to the separate PIN code and the phone number based on actual settings. The PIN can also be
omitted.
The actual operation is shown below:
• If making a call from Gateway A to Gateway B, and diverting to PSTN (local call) when Gateway A
and Gateway B both have Outbound Call Control disabled, dial as follows:
Gateway B Number + Local Phone Number
For
example: 5168 35020311#
• When Gateway A disables Inbound Call Control and Gateway B enables Outbound Call Control, then
dial as follows:
* Gateway B PIN Code * Gateway B Number Local Phone Number
For
example:*123456* 5168 35020311# (Gateway B PIN Code: 123456)
• When Gateway A enables Inbound Call Control and Gateway B disables Outbound Call Control, then:
If using an extension line at Gateway A to make a local call to a remote end (at Gateway B site)
through Gateway B, then dial
Gateway B Number + Local Phone Number
For
example: 5168 35020311#
• If using a trunk line to dial to Gateway A, and then making a local call to a remote end (at Gateway B
site) through Gateway B, then dial
* Gateway A PIN Code * Gateway B Number + Local Phone Number
• When the instruction “Enter phone number” is given, then dial
For
example:*111111* 5168 35020311# (Gateway A PIN Code: 111111)
• If using a trunk line to dial to Gateway A and then to the extension line of Gateway B, dial
* Gateway A PIN Code * Gateway B Number
When the instruction “Enter phone number” is given.
For
example:*111111* 5168#
• When Gateway A has Inbound Call Control enabled and Gateway B has Outbound Call Control
enabled, then if using an extension line at Gateway A to make a phone call to a remote end through
Gateway B, dial:
* Gateway B PIN Code * Gateway B Number Local Phone Number
For
example: *123456* 5168 35020311# (Gateway B PIN Code: 123456)
• If using a trunk line to dial to Gateway A, and then dialing a local call to a remote site through
Gateway B, please dial
* Gateway A PIN Code * Gateway B PIN Code * Gateway B Number Local Phone Number
For
example:*111111* 123456* 5168 35020311# (Gateway A PIN Code 111111 Gateway B PIN
Code 123456)