NetComm SmartVoice Gateway - Manual (Page 29)

SmartVoice Gateway(s) User Guide 29
YML832 Rev1
• Group Hunting: Select group hunting when there is an incoming call and the gateway will
automatically assign an unassigned call according to the Hunting Priority. If Line 2 does not want to
be set as an assigned line to receive any inbound calls, the function can be disabled. Users can also
use the Up or Down key to adjust hunting priority (No setting is required for the FXO interface).
• Enable FAX: Enable this line to detect if there is a FAX tone to transfer the codec.
Description:
• Trunk Hunting Order: To set FXO dial-out mode when there is an incoming call dialed FXO
representative number. (This option only appears in the gateway which has more one FXO ports)
First Idle: The gateway will assign each unassigned call from first FXO line.
Sequential: The gateway will automatically assign the first unassigned call to the first FXO line. The
second FXO line will dial the second unassigned call out. Each line will be used.
• Transit in Busy Tone Limit: The duration the VoIP gateway plays a busy tone before FXO port goes
on-hook. Used to notify the caller from PSTN that this call is finished.
• Ring Time Limit (10 - 600secs): The timeout to cancel a call when no one answers.
• Enable End of Digit Tone: The VoIP gateway will play a “Beep-Beep” tone to notify that the call is
in progress.
• VoIP
Calling Notification: The gateway will play a tone to notify the call is through VoIP.
• Force Calling Thru PSTN code: Dial the code to get a PSTN line for dial out. For example: If you
specify “33” in this option and would like dial “23456789” through PSTN, just dial “33 23456789”
• Support One Way Media: If it is disabled, the system will send RTP immediately when the
connection with Proxy is set up. The default is enabled. If communicating with other Gateway has
problem, please disable this function.
• Hunting/Ring: It is able to set FXS group hunting using simultaneous ring or sequential ring.
• Sequential Ring Time: To set the ring time of each port, when sequential ring is chosen.
• Hunting Priority: it can be adjusted using the Up or Down arrows.