NetComm SmartVoice Gateway User Manual
Page 18
18
SmartVoice Gateway(s) User Guide
YML832 Rev1
Example of SmartVoice Gateway using a combination of FXS and FXO ports
Phone1-Phone2 are FXS interfaces and can be directly connected to telephone sets for direct calls.
Line1-Line2 are FXO interfaces and can be connected to PSTN lines to serve as a bridge between the
PSTN and other VoIP telephones. The system also allows a call to be made from a traditional telephone
line to connect with a user behind the SmartVoice Gateway.
Integrating the SmartVoice Gateway with PBX
Phone1-Phone2 are FXS interfaces and can be connected to PBX CO lines; Line1-Line2 are FXO
interfaces and can be connected to a PSTN to act as a bridge between the PSTN and other VoIP
telephones. The system also allows a call to be made from a traditional telephone line to connect with a
user behind the SmartVoice Gateway.
Note:
The above diagrams show a 4-port SmartVoice gateway for illustration purposes.
An 8, 16 or 32 port SmartVoice gateway could also be used depending upon your
network requirements.