Configuration, Configuration -2 – National Instruments E Series User Manual
Page 21
Chapter 2 Installation and Configuration
DAQCard E Series User Manual
2-2
National Instruments Corporation
Figure 2-1 shows an example of a typical configuration.
Configuration
Your DAQCard is completely software-configurable. Refer to your
software documentation to install and configure your software.
If you are using NI-DAQ, refer to your NI-DAQ release notes to install
your driver software. Find the installation section for your operating
system and follow the instructions given there.
If you are using LabVIEW, refer to your LabVIEW release notes to
install your application software. After you have installed LabVIEW,
Figure 2-1.
A Typical Configuration for the DAQCard E Series Card
PCMCIA Socket
Portable
Computer
PSHR68-68M
I/O Cable
SH6868 Cable
I/O Signals
INSERT CARD
DAQCard
™
-AI-16E-4
N
A T
IONA
L
IN
ST
RU
ME
NT
S
™
The Software is the Instrument
®