Nortel Networks Application Server 53r 5300 00 - Manual (Page 47)

Configuring the NTP, Syslog, and Audit Daemon settings 47
Disable the serial console redirection by selecting option 3 and
proceed to step 12.
OR
Enable system console redirection by selecting option 1.
The system displays the following prompt:
Please select the speed of the serial port:
11 From the list of port speed options, select the speed that best
matches the speed used on the equipment attached to the
RS-232 serial cable.
The system displays the following prompt:
Enter Region (1-62):
12 Enter the number that best represents the geographic region of
the server.
Not all regions from the first level will have second-level choices
defined.
If a second-level choice is defined for the geographic region, the
system displays the following prompt:
Enter Timezone Selection for Region (0, 1-<xx>):
13 Enter the number that best represents the time zone of the
server.
The system displays a summary of the current configuration
settings.
14 Do one the following:
Type Y to confirm the configuration settings and continue with
the Linux installation process.
OR
Type N to repeat the previous configuration steps and make
changes.
--End--
Configuring the NTP, Syslog, and Audit Daemon settings
This phase of the Linux operating system installation configures the
following items:
•
Network Time Protocol settings
• Syslog configuration
•
Audit Daemon configuration
Application Server 5300
Nortel AS 5300 Installation
NN42040-300 01.04
4 November 2008
Copyright © 2007-2008 Nortel Networks
.