Nortel Networks Application Server 53r 5300 00 - Manual (Page 89)

MCP core software load Maintenance Release installation 89
sudo ./mcpCopyFromESD.pl -m manifest-online
8 Copy the ASU files.
sudo ./mcpCopyFromESD.pl -m manifest-asu-pc
9 Remove the ISO image file from the file system.
rm /var/mcp/esd_files/<filename>
10 Delete older MCP loads.
Nortel recommends to only keep the current MCP software
load and the load that the system will be upgraded to in the
/var/mcp/loads directory to free up disk space.
cd /var/mcp/loads
rm –Rf <old_load_directory>
Attention: Use extreme caution when using rm -Rf commands.
Entering a typo can cause an entire file system to be removed
without confirmation if you have the proper user privileges. For
example, entering a command such as rm -Rf / mcp/loads (with
an extra space after the first forward slash) can remove the
entire directory tree.
11 Repeat this procedure for the secondary System Manager.
--End--
Upgrading the database schemas and System Manager
You can upgrade the System Manager without causing a service outage to
users, but all active MCP System Management Consoles are shut down
during the upgrade process.
Prerequisites
•
The new MR load.zip file is in the /var/mcp/loads directory.
Procedure Steps
Step Action
1 Log on to the primary System Manager as the AA role
(ntappadm) using SSH.
2 Change directory:
cd /var/mcp/install
3 Run the Maintenance Release upgrade script:
Application Server 5300
Nortel AS 5300 Installation
NN42040-300 01.04
4 November 2008
Copyright © 2007-2008 Nortel Networks
.