Nortel Networks Application Server 53r 5300 00 - Manual (Page 64)

64 AS 5300 software deployment
Staging files
Staging files are used to configure the initial system. The AS 5300
software load includes two sets of staging files consisting of an import file
and a tags file. Two sets of staging files are defined based on the number
of core servers in the configuration. The following sections describe these
sets.
2-server staging files (small system)
2-server staging configurations consist of a redundant installation where
all core components are distributed across two servers. For a 2-server
staging configuration, the following files are used:
• installprops.txt
• StagingFedPBX2Server.tags
• StagingFedPBX2Server.xml
Figure 4 "Physical view of a 2-server staging configuration" (page 64)
shows the physical view of a 2-server staging configuration:
Figure 4
Physical view of a 2-server staging configuration
The following parameters represent specific values in the 2-server tags file:
•
hostnames for the Element Management server
•
IP address of the Element Management server
•
service logical IP address for the System Manager, Accounting
Manager, and Session Manager
• name of the site where the System Manager and Database will be
configured
Application Server 5300
Nortel AS 5300 Installation
NN42040-300 01.04
4 November 2008
Copyright © 2007-2008 Nortel Networks
.