NetComm NB1300 Plus 4W - Manual (Page 30)

www.netcomm.com.au Rev. 1- YML672
Page 30 NB1300_2 ADSL Modem
Gateway USB
Note: You must click the Submit button on every page that you make changes on and
when you have made all your changes click the Save Setting and Reboot button
from the bottom of the menu.
c. Click on the One Page Setup link under the Basic menu. You do not need to change the
LAN settings unless you need the NB1300 to work with an existing network on a subnet
other than 192.168.1.x.
You will need to Change your WAN and VC settings as provided by your ISP. The following
lists an example of the most common ISP settings used in Australia. The fields that require
changing from the default settings are highlighted.