NetComm NB1300 Plus 4W - Manual (Page 38)

www.netcomm.com.au Rev. 1- YML672
Page 38 NB1300_2 ADSL Modem
Advanced
ADSL
The ADSL Status page shows the ADSL physical layer status.
ADSL Line Status: This field displays the ADSL connection process and status.
ADSL Modulation: This field displays the ADSL modulation status for G.dmt or T1.413.
ADSL Annex Mode: This field displays the ADSL annex modes for Annex A or Annex B.
ADSL Startup Attempts: This field displays the ADSL connection attempts after
loss of showtime.
Elapsed Time: This field displays the time of the modem has been in operation.
SNR Margin: Amount of increased noise that can be tolerated while maintaining the
designed BER (bit error rate). The SNR Margin is set by Central Office DSLAM. If the SNR
Margin is increased, bit error rate performance will improve, but the data rate will decrease.
Conversely, if the SNR Margin is decreased, bit error rate performance will decrease, but the
data rate will increase.
Line Attenuation: Attenuation is the decrease in magnitude of the ADSL line signal
between the transmitter (Central Office DSLAM) and the receiver (Client ADSL Modem),
measured in dB. It is measured by calculating the difference in dB between the signal power
level received at the Client ADSL modem and the reference signal power level transmitted
from the Central Office DSLAM.
Errored Seconds: The error during Showtime (ADSL link), whenever, a given sec contains
CRC error, that second will be declared error second.
Loss of Signal: This field displays the count of event of ADSL signal loss.
Loss of Frame: This field displays the count of event of ADSL frame loss.
CRC Errors: This field displays the number of transmit data frames containing CRC errors.
Data Rate:
This field displays the ADSL data rate.
Latency: This field displays the latency modes for fast or interleave.