Led indicators – NetComm NB1300 Plus 4W User Manual
Page 8
www.netcomm.com.au
Rev. 1- YML672
Page 8
NB1300_2 ADSL Modem
Overview Section
LED Indicators
The LED Indicators are located on the front of the unit, they are green in colour. The meanings
are as follows:
Label
Meaning
Status
Indicates:
PWR
Power
On
Power is on
O f f
Power is off
RDY
Ready
Flashing
Unit is powered up correctly when pulsing steadily.
ON or OFF during reboot or when unit switched
OFF. If ON or OFF permanently then there is an
error. Try powering unit OFF then ON after a
minute.
WAN LNK
WAN Link
Flashing
Link being attempted by router.
On
Link established
O f f
No link
WAN RXD
WAN Receive Data
Flashing
Flashes when receiving or sending data on the WAN
port (ADSL line)
O f f
No data being sent or received
LAN ACT
LAN Activity
Flashing
Flashes when data is being sent or received on the
LAN connection
LAN LNK
LAN Link
On
Indicates a link to your LAN or Network card is
active.
O f f
Indicates no link to LAN