Gateway usb – NetComm NB1300 Plus 4W User Manual
Page 31
Rev. 1 - YML672
www.netcomm.com.au
NB1300_2 ADSL Modem
Page 31
Gateway USB
Field
Setting Details
Service name:
Any name to describe your ISP.
User Name:
Your ISP will provide a case sensitive User Name in a
format similar to your email address. Contact your ISP
for details.
Password:
Enter your Password as supplied by your Service
Provider (characters are usually all lower case).
Disconnect timeout:
0
❖
Mode/Wan Connection Type:
PPPoE LLC or PPPoA
VPI:
8
❖
VCI:
35
❖
Static IP Address:
192.168.241.101
❖
Subnet Mask:
255.255.255.0
❖
Default Gateway:
0.0.0.0
❖
Bridge mode:
Disabled
❖
❖
Default Setting. Although in most cases you will not be required to alter these
default settings for your NB1300, your ISP may identify specific settings to enable
connection to their service. Please refer to your ISP or Network Administrator for
further information.
d. Click Submit and then click the Save Setting and Reboot button from the bottom of the
menu. Wait for the configuration to complete.
Step 3: Configuring your Computer to use the NB1300
Most applications call for the Primary and Secondary DNS server entries to be made on each
computer. These can be automatically assigned by another DHCP server or by enabling the
DHCP server on the NB1300 ADSL Modem, and entering the DNS values in the DNS section
of the NB1300.