NetComm NB1300 Plus 4W - Manual (Page 50)

www.netcomm.com.au Rev. 1- YML672
Page 50 NB1300_2 ADSL Modem
Advanced
RIP Configuration
The RIP Per Interface Configuration page allows the user to set the configuration for each
Interface (PVCs, PPP Sessions, USB and LAN).
Interface: This field allows the user to choose the Interface (PVCs, PPP Sessions, USB and
LAN), for the RIP to be configured.
Enable: This field allows the user to Enable (Yes) or Disable (No) the specified interface for
RIP.
Supplier: This field allows the user to select the Supplier Mode (RIP Transmit).
❏ Disabled: The supplier transmit is disabled.
❏ V1 BC: The supplier transmits in RIPv1 Broadcast.
❏ V2 BC: The supplier transmits in RIPv2 Broadcast.
❏ V2 MC: The supplier transmits in RIPv2 Multicast.
Listener: This field allows the user to select the Listener Mode (RIP Receive)
❏ V1: The listener receives the RIPv1 only.
❏ V2: The listener receives the RIPv2 only.
❏ V1+V2: This listener receives the both RIPv1 and RIPv2.
Supplier and Listener are based on section 4.1 "Compatibility Switch" in RFC 1723.
Current RIP Settings: This field displays the each interface's RIP status.