NetComm NB1300 Plus 4W - Manual (Page 69)

Rev. 1 - YML672 www.netcomm.com.au
NB1300_2 ADSL Modem Page 69
Advanced
Save Settings and Reboot
The Save Settings and Reboot button allows the user to save the new configuration to the flash
and reboot the system. When the configurations are changed via the Web pages, the new settings
need to be saved into the flash, so it is necessary to go to this Save Settings page to save and
reboot the system for the changes to be taken effect. After the Save and Reboot, you will be
returned to the onepage setup.
Note: DO NOT power the unit off or press the reset button again during the reboot process.