NetComm NB1300 Plus 4W - Manual (Page 56)

www.netcomm.com.au Rev. 1- YML672
Page 56 NB1300_2 ADSL Modem
Advanced
Misc Configuration
The Miscellaneous Configuration allows the user to set all the miscellaneous configurations.
HTTP Server Access: This field allows the user to configure the Web pages can be
accessed from.
All: When this field is checked, it allows both WAN and LAN access to the Web pages.
Restricted LAN: This field allows the Web pages access from LAN side.
Restricted WAN Specified IP & Subnet Mask: This field allows the Web access from WAN
side with a specify IP and subnet mask.
HTTP Server Port: This field allows the user to specify the port of the Web access.
For example, when it is changed to 1001, the HTTP server address for the LAN/WAN
access is http://192.168.1.1:1001.
FTP server: This field allows the user to enable or disable the FTP connection. If you want
FTP access from the WAN side you must ensure there are no port forwards for port 21.
TFTP server: This field allows the user to enable or disable the TFTP connection.
DMZ: A DMZ (De-Militarized Zone) is added between a protected network and an external
network, in order to provide an additional layer of security. When there is a suspected
packet coming from WAN, the firewall will forward this packet to the DMZ host.
DMZ Host IP: The IP address of the DMZ host at LAN side.
DHCP Relay: If it is enabled, the DHCP requests from local PCs will forward to the
DHCP server runs on the WAN side of a network. To have this function working properly,
please disable the NAT to run on router mode only, disable the DHCP server on the LAN
port, and make sure the routing table has the correct routing entry.