Nortel Networks HotWire 8600 - Manual (Page 22)

Installing and Connecting the Hardware
2-6 8600-A2-GN20-20 October 1997
4. Change the setting of the rotary STACK POSITION switch to the appropriate
position of the chassis. Set the switch so that the white line points to the
position number.
— The base chassis containing the MCC card must be set to
Stack Position 1;
— The chassis directly on top of the base chassis must be set to Stack
Position 2;
— The chassis directly on top of chassis #2 must be set to Stack Position 3,
and so on.
97-15372
Base Unit
Stack Position 1
Stack Position 2 Stack Position 3
4 6
5A
.
.
.
3
.
1
2
POSITION
STACK
ALM
5
FAN
4 6
5A
.
.
.
3
.
1
2
POSITION
STACK
ALM
5
FAN
4 6
5A
.
.
.
3
.
1
2
POSITION
STACK
ALM
5
FAN