Nortel Networks HotWire 8600 - Manual (Page 27)

Installing and Connecting the Hardware
2-11 8600-A2-GN20-20 October 1997
2. Secure the mounting brackets to the 8600 chassis by using the screws
removed from the sides of the unit.
3. Determine the preferred placement of the 8600 chassis in the rack. Then,
mark the appropriate locations for the mounting screws on the rack.
4. Place the 8600 chassis against the front rails of the rack and secure with the
appropriate mounting screws.
Repeat these steps for each succeeding 8600 chassis.
Front Rail
97-15353