Nortel Networks HotWire 8600 - Manual (Page 9)

About This Guide
iv 8600-A2-GN20-20 October 1997
Document Summary
Section Description
Chapter 1 About the HotWire 8600 DSLAM. Provides an overview
of the HotWire 8600 DSLAM chassis, its components,
and its features.
Chapter 2 Installing and Connecting the Hardware. Describes
how to mount the chassis, stack two or more chassis,
install the MCC and DSL cards, and make cable
connections to the network.
Chapter 3 Initial Setup Instructions. Describes how to configure
the MCC card for remote configuration.
Chapter 4 Troubleshooting. Describes problems that may occur
and how to troubleshoot them.
Appendix A LEDs. Describes the meaning of the LEDs on the
chassis, and on the MCC and DSL cards.
Appendix B Pinouts. Provides the pin assignments for the
connectors on the Interface Panel.
Appendix C Technical Specifications. Provides the technical
specifications of the chassis.
Glossary Defines acronyms and terms used in this document.
Index Lists key terms, acronyms, concepts, and sections in
alphabetical order.