Connecting to a hotwire 8600 dslam via telnet – Nortel Networks HotWire 8600 User Manual
Page 44
Advertising
Installing and Connecting the Hardware
2-28
8600-A2-GN20-20
October 1997
Connecting to a HotWire 8600 DSLAM Via Telnet
You can connect to a HotWire 8600 DSLAM via a telnet session from either a
workstation or PC that has access to the Management Domain LAN.
"
Procedure
If you are using a Solaris 2 or SUN OS 4 workstation:
1. Execute a window manager program, such as OpenWin.
2. Execute a terminal emulator program.
3. Set terminal type to VT100.
4. Establish a telnet session by issuing the telnet command and providing the
Management Domain IP address for the MCC card on the command line.
If you are using a PC, establish a telnet session by issuing the telnet command
and providing the Management Domain IP address for the MCC on the command
line.
Advertising