Chapter 3 configuration and default settings, Hardware default settings, Hardware default settings -1 – National Instruments NI VXIpc-882 User Manual
Page 22: Configuration and default settings
Advertising
© National Instruments Corporation
3-1
3
Configuration and Default
Settings
Hardware Default Settings
This chapter summarizes the hardware default settings for the
NI VXIpc-882 for easy reference. The module is set at the factory for the
most commonly used configuration.
Figure 3-1 and Table 3-1 show the factory-default settings of the
user-configurable jumpers on the NI VXIpc-882 controller. Tables 3-2,
3-3, 3-4, 3-5, and 3-6 show user-configurable settings
in Measurement & Automation Explorer (MAX).
Advertising