National Instruments NI VXIpc-882 - Manual (Page 47)

Chapter 3 Configuration and Default Settings
NI VXIpc-882 User Manual 3-26 ni.com
Advanced: Lower Half Window: Map
Lower Half To System Memory
Advance: Upper Half Window: Map
Upper Half To System Memory
Table 3-20. PCI-MXI-2 MXI-2 Bus Tab Default Settings
Setting Default Value
Bus Settings: Bus Timeout 1 ms
System Controller Auto Detect
Advanced: Bus Protocols: Enable
MXI-2 Auto Retry Checked
Advanced: Bus Protocols:
Enabled A24/A32 Write Posting Checked
Advanced: Bus Protocols: MXI
Transfer Limit 256
Advanced: MXI-2 CLK 10 Signal Receive
Table 3-21. PCI-MXI-2 PCI Tab Default Settings
Setting Default Value
User Window: Enable Low-Level
Register Access API Support Checked
User Window: User Window Size 64 KB
Enable PCI Expansion ROM Checked
DMA Setting Enable DMA on this Controller
Table 3-19. PCI-MXI-2 Shared Memory Tab Default Settings (Continued)
Setting Default Value