Roland VG-88 - Manual (Page 41)

41
COSM GUITAR Chapter 5. Parameter Guide
Chapter 5
A slightly pitch-shifted sound is added to the original sound
of each string, producing a spacious feeling.
ON/OFF
Switches the detune on/off.
DETUNE [0–100]
A slightly pitch-shifted sound is added to the original sound
of each string.
Specifies the shift amount of the pitch-shifted sound.
ON/OFF
Switches the pedal pitch shift on/off.
PITCH [-24–24]
Specifies the amount of pitch shift obtained when you
operate the pedal.
STRING 1–6 [ON/OFF]
Turns pedal pitch shift on/off for each string. This allows
you to shift only the pitch of specific strings.
SET PDL (setting pedal)
Assign the Pitch Shift function to the built-in EXP pedal.
You can individually distort the sound of each string to get a
sound that can be played chordally without “breaking up.”
ON/OFF
Switches the distortion on/off.
* Turning [VALUE] will select PRESET.
MODE
Selects the type of distortion.
CLA OD (clear overdrive):
A clear overdrive sound is obtained.
TURBO OD (turbo overdrive):
Allows you to obtain a rich effect just like distortion,
without losing the subtle nuance of the overdrive.
DS1 (distortion 1):
Allows you to obtain a standard distortion sound.
DS2 (distortion 2):
Allows you to obtain a distortion sound with a rich
middle.
FUZZ:
This produces a basic fuzz sound.
DRIVE [0–100]
This sets the degree of sound distortion.
HIGH CUT [700 Hz–11.0 kHz, FLAT]
Adjusts the tone of the distorted sound.
LEVEL [0–100]
Adjusts the output level that is raised by being distorted.
POLY BAL (poly balance) [0–100]
Adjusts the degree of distortion for chordal playing.
DRV BAL (drive balance) [0–100]
Adjusts the degree of distortion between low and high
strings, to even out the volume balance.
DETUNE
PD SHIFT (pedal pitch shift)
POLY DISTORTION
(polyphonic distortion)