Roland VG-88 - Manual (Page 57)

57
Chapter 5. Parameter Guide
Chapter 5
GK FUNC (GK function)
Here you can specify the function of the GK pickup.
DOWN/S1
UP/S2
Specifies the function assigned to the S1 or S2 switches of the
GK pickup.
ASSIGNABLE:
Settings can be made in each patch as parameter control
buttons.
MASTER LEVEL:
Increment or decrement the master level.
PEDAL FUNC:
While holding down the S1/S2 switch of the GK-2A/
GK-3, press a VG-88 pedal to assign the function.
Number pedal [1]:
MASTER LEVEL down
Number pedal [2]: MASTER LEVEL up
Number pedal [3]: TUNER
Number pedal [4]: BPM TAP
VG-88 CTL pedal: Control pedal
VG-88 EXP pedal: FOOT VOLUME
BANK ▼ pedal: PU SELECT down
BANK ▲ pedal: PU SELECT up
PATCH SELECT:
Increment or decrement the patch.
PU SELECT:
Alters the position of the pickup used in the COSM
GUITAR block.
TUNER/BPM:
The S1 switch will be assigned the Tuner function, and
the S2 switch will be assigned the BPM (tap input)
function.
* When set to anything other than “ASSIGNABLE,” the
PEDAL/ASSIGN GK S1/S2 and ASSIGN 1-8 SOURCE GK
S1/S2 settings are disabled.
SYNTH VOL (synth volume)
Specifies the function assigned to the SYNTH VOL knob of
the GK pickup.
ASSIGNABLE:
The function can be set for each patch as a parameter
control knob. Depending on the parameter that is
assigned, the GK pickup select switch may not function.
PICKUP LEVEL:
Controls the output level of the COSM GUITAR pickup.
MIXER LEVEL:
Controls the mixer level of the COSM GUITAR.
MASTER LEVEL:
Controls the MASTER LEVEL.
* When set to anything other than “ASSIGNABLE,” the
PEDAL/ASSIGN GK VOL and ASSIGN 1-8 SOURCE GK
S1/S2 settings are disabled.