Roland PCR-500 - Manual (Page 55)

55
Settings (Edit mode)
You can assign a system exclusive message to a controller.
Advanced editing 2 lets you assign a single-byte system message (system realtime message, tune request).
Advanced editing 3 and 4 let you freely assign a message of up to twenty-four bytes.
System exclusive assign lets you automatically calculate the checksum, or insert variable data or a channel/block number into the message.
For system exclusive assign, the input mode (p. 64) will be Hexadecimal.
System exclusive assign
Edit Controller Display Content Value range Ending condition Remarks/Limitations
Basic editing [A1 (0)] Sys Ex. message Range of initial settings Enter F7 First byte fixed at F0
Advanced editing 1 [A2 (1)] Sys Ex. message Can be specified Enter F7 First byte fixed at F0
Advanced editing 2 [A3 (2)] 1-byte system message — —
[0–5, 7, 9, D, E], [DATA], and
[CHECKSUM] buttons are unavailable
Advanced editing 3 [A4 (3)] Any MIDI message Range of initial settings Specified number of bytes [CHECKSUM] button is unavailable
Advanced editing 4 [A5 (4)] Any MIDI message Can be specified Specified number of bytes [CHECKSUM] button is unavailable
PCR-300_500_800_e.book 55 ページ ２００６年１２月１９日 火曜日 午後２時５９分