Control map settings, Startup memory, You can use the – Roland PCR-500 User Manual
Page 79: P. 79) to specify which control map should be, P. 79
79
System settings
Here’s how to specify the control map that will be selected when you turn on the
power.
1
Press the [EDIT] button so it’s lit.
The display will indicate “EDIT.”
2
Use the VALUE knob to select “SYS,” and press the [ENTER] button.
3
Use the VALUE knob to select “SY12,” and press the [ENTER] button.
4
Use the VALUE knob or controllers [A1] or [A2] to choose CONTROL MAP No. 0
or LAST ACCESS MEMORY.
5
Press the [ENTER] button.
Control map settings
Startup Memory
Controller
Indication
Setting
Summary
[A1 (0)]
CONTROL
MAP No. 0
Control map number 0 will be load-
ed into current memory (p. 8) when
the PCR starts up.
[A2 (1)]
LAST
ACCESS
MEMORY
The control map that you most re-
cently called up or saved will be
loaded into current memory (p. 8)
when the PCR starts up.
PCR-300_500_800_e.book 79 ページ ２００６年１２月１９日 火曜日 午後２時５９分