Pad settings, Pad velocity curve, Pad aftertouch curve – Roland PCR-500 User Manual
Page 75: Pad velocity curve pad aftertouch curve, P. 75
75
System settings
Here’s how to specify how the velocity transmitted when you play the pad controllers
[A1]–[A9] and [B1]–[B9] will respond to your playing strength.
1
Press the [EDIT] button so it’s lit.
The display will indicate “EDIT.”
2
Use the VALUE knob to select “SYS,” and press the [ENTER] button.
3
Use the VALUE knob to select “SY06,” and press the [ENTER] button.
4
Use the VALUE knob or controllers [A1]–[A4] to specify the desired Pad Velocity
Curve.
The display will indicate the curve you specify.
5
Press the [ENTER] button to return to Play mode.
Here’s how to specify the aftertouch response of the pads.
1
Press the [EDIT] button so it’s lit.
The display will indicate “EDIT.”
2
Use the VALUE knob to select “SYS,” and press the [ENTER] button.
3
Use the VALUE knob to select “SY07,” and press the [ENTER] button.
4
Use the VALUE knob or controllers [A1]–[A4] to specify the desired Pad
Aftertouch Curve.
The display will show the setting you specified.
5
Press the [ENTER] button to return to Play mode.
Pad settings
Pad Velocity Curve
Controller
Indication
Setting
Curve type
Effect
[A1 (0)]
1
This is the most typical set-
ting. It will produce the most
natural correspondence be-
tween the force of your pad
strike and the change in vol-
ume.
[A2 (1)]
2
Compared to curve 1, this al-
lows more volume change to
be produced in the softer
range of pad strikes.
[A3 (2)]
3
This curve produces less vol-
ume change in response to
your pad strikes, making it
easier to maintain a consis-
tent volume.
[A4 (3)]
4
Compared to curve 1, this
produces more volume
change in the stronger range
of pad strikes.
1
2
3
4
Pad Aftertouch Curve
Controller
Indication
Setting
Curve type
Effect
[A1 (0)]
1
This is the most typical set-
ting. It will produce the most
natural correspondence be-
tween the pressure you apply
to the pad and the aftertouch
data that is produced.
[A2 (1)]
2
Compared to curve 1, this al-
lows aftertouch to be pro-
duced even with light
pressure on the pad.
[A3 (2)]
3
This curve produces less af-
tertouch change in response
to pressure on the pad, mak-
ing it easier to perform con-
sistently.
[A4 (3)]
4
Compared to curve 1, this
will produce aftertouch in re-
sponse to strong pressure on
the pad.
1
2
3
4
PCR-300_500_800_e.book 75 ページ ２００６年１２月１９日 火曜日 午後２時５９分