Midi settings, Midi i/f switch, P. 76)) – Roland PCR-500 User Manual
Page 76: P. 76
76
System settings
Here’s how to specify whether the MIDI connectors will be used as a MIDI interface.
1
Press the [EDIT] button so it’s lit.
The display will indicate “EDIT.”
2
Use the VALUE knob to select “SYS,” and press the [ENTER] button.
3
Use the VALUE knob to select “SY08,” and press the [ENTER] button.
4
Use the VALUE knob or controllers [A1] or [A2] to specify the desired MIDI I/F
setting.
The display will show the setting you specified.
5
Press the [ENTER] button to return to Play mode.
MIDI settings
MIDI I/F Switch
Controller
Indication
Setting
Summary
[A1 (0)]
OFF
MIDI messages received by the PCR keyboard
will not be transmitted from the PCR. MIDI mes-
sages will be transmitted and received between
the PCR and the computer, or between the PCR
and the external MIDI device.
[A2 (1)]
ON
The MIDI connectors of the PCR keyboard will
operate as a MIDI interface. MIDI messages
from the computer that’s connected via USB to
the PCR will be conveyed to the sound module
connected to the PCR’s MIDI OUT connector.
MIDI messages from the MIDI device connected
to the PCR’s MIDI IN connector will be con-
veyed to the computer.
EDIROL PCR 2
EDIROL PCR 1
EDIROL PCR MIDI IN
EDIROL PCR
EDIROL PCR MIDI OUT
MIDI OUT
MIDI IN
MIDI I/F MODE OFF
MIDI OUT device
MIDI IN device
Bulk reception
PORT 1
PORT 2 /
Bulk transmission
X
X
MIDI messages
USB
EDIROL PCR 2
EDIROL PCR 1
EDIROL PCR MIDI IN
EDIROL PCR
EDIROL PCR MIDI OUT
MIDI OUT
MIDI IN
MIDI I/F MODE ON
PORT 1
PORT 2 /
USB
MIDI OUT device
MIDI IN device
Bulk reception
Bulk transmission
MIDI messages
PCR-300_500_800_e.book 76 ページ ２００６年１２月１９日 火曜日 午後２時５９分