Keyboard settings, Keyboard velocity curve, P. 72) – Roland PCR-500 User Manual
Page 72: P. 72
72
System settings
Here’s how to specify how the velocity transmitted when you play the keyboard will
respond to your playing strength.
1
Press the [EDIT] button so it’s lit.
The display will indicate “EDIT.”
2
Use the VALUE knob to select “SYS,” and press the [ENTER] button.
3
Use the VALUE knob to select “SY03,” and press the [ENTER] button.
4
Use the VALUE knob or controllers [A1]–[A8] and [B1]–[B4] to specify the
desired Keyboard Velocity Curve.
The display will indicate the curve you specify.
5
Press the [ENTER] button to return to Play mode.
Keyboard settings
Keyboard Velocity Curve
Controller
Indication
Setting
Type of curve
Keyboard sensitivity
[A1 (0)]
1-LIGHT
These are the most typical velocity curves.
The volume will correspond to your key-
board playing strength in the most natural
way.
You can produce high velocity values (volumes) even by playing the keyboard softly.
[A2 (1)]
1-MEDIUM
The keyboard sensitivity will be normal.
[A3 (2)]
1-HEAVY
You will need to play strongly in order to produce high velocity values (volumes).
[A4 (3)]
2-LIGHT
Compared to curve 1, these curves produce
greater volume change across the softly
played range of notes.
You can produce high velocity values (volumes) even by playing the keyboard softly.
[A5 (4)]
2-MEDIUM
The keyboard sensitivity will be normal.
[A6 (5)]
2-HEAVY
You will need to play strongly in order to produce high velocity values (volumes).
1
2
PCR-300_500_800_e.book 72 ページ ２００６年１２月１９日 火曜日 午後２時５９分