Roland PCR-500 - Manual (Page 68)

68
System settings
Here’s how to make system settings for the PCR-300/500/800.
The system setting items are listed below.
Category Controller Display Item Contents Factory setting Procedure
Clock
[A1 (0)] F8 CLOCK ON/OFF Specifies whether F8 Clock will be transmitted. OFF p. 70
[A2 (1)]
F8 CLOCK DEFAULT
TEMPO
If “F8 Clock On/Off” is on, this specifies the default tempo of the F8
clock. After the power is turned on, this tempo will be output until you
move the VALUE encoder to which TEMPO is assigned.
120 p. 70
[A3 (2)] F8 CLOCK PORT SET
Specifies the port from which F8 Clock is transmitted when “F8 Clock
On/Off” is on.
PORT 1 p. 71
Keyboard
[A4 (3)]
KEYBOARD VELOCITY
CURVE Specifies the response curve for the velocity that is transmitted when
you play the keyboard.
1-MEDIUM p. 72
[A5 (4)] KEYBOARD PORT SET
Specifies the port from which the keyboard and bender lever will
transmit performance data.
PORT 1 p. 74
[A6 (5)]
KEYBOARD
AFTERTOUCH CURVE
Specifies the response curve for keyboard aftertouch. 1 p. 74
Pads
[A7 (6)] PAD VELOCITY CURVE
Specifies the response curve for the velocity that is transmitted when
you strike a pad controller [A1]–[A9] or [B1]–[B9].
1 p. 75
[A8 (7)]
PAD AFTERTOUCH
CURVE Specifies the response curve for the aftertouch that is transmitted
when you press a pad controller [A1]–[A9] or [B1]–[B9].
1 p. 75
PCR-300_500_800_e.book 68 ページ ２００６年１２月１９日 火曜日 午後２時５９分