Ricoh AFICIO MP01 - Manual (Page 115)

TROUBLESHOOTING
5-13
TROUBLESHOOTING
Clearing Misfeeds from Area Y
Follow these steps to clear a paper misfeed from Area Y.
1 Open paper trays 3 and 4 and remove any misfed paper.
2 Open the right lower cover of the
printer.
Note: When the optional Large Capacity Tray (LCT) is installed, you must
pull the LCT away from the printer. ☛ Refer to the “Clearing Misfeed
from Area U” section in this chapter for instructions on how to pull out
the LCT from the printer.
3
Remove any misfed paper from the area inside of the right lower cover.
4 Close the right lower cover.
Note: When necessary, move the LCT back into position after you remove
the misfed paper.