Ricoh AFICIO MP01 - Manual (Page 127)

TROUBLESHOOTING
5-25
TROUBLESHOOTING
Table 5-7. Consumable messages (continued)
Message Description Action
Load <paper size>
By-pass Tray
The print job requires the specified
paper size in the By-pass Tray. Place the specified paper size
in the By-pass Tray.
You can force the printer to use
the default tray, ignoring the
paper size, by pressing the
[Esc.] key.
Load <envelope size>
Envelope Feeder The print job requires the specified
envelope size in the Envelope Feeder. Place the specified envelope
size in the Envelope Feeder.
You can force the printer to use
the default tray, ignoring the
paper size, by pressing the
[Esc.] key.
Load <paper size>
LCT The print job requires the specified
paper size in the Large Capacity Tray
(LCT). Place the specified paper size
in the LCT.
You can force the printer to use
the default tray, ignoring the
paper size, by pressing the
[Esc.] key.
Load <paper size>
Tray <number> The specified paper tray is empty or
the paper is low. Place paper in the specified
tray.
You can force the printer to use
the default tray, ignoring the
paper size, by pressing the
[Esc.] key.
Add Staple
Finisher The Finisher is out of staples. Replace the staple cartridge.
Add Toner The machine is almost or completely
out of toner. Redistribute toner in the
cartridge.
Replace the toner cartridge.
Change Fusing Unit You must replace the Fusing Unit. Replace the Fusing Unit.
Change PCU You must replace the PCU. Replace the PCU.